i.MX283 Freescale NXP EK283 IMX287 replace Samsung Linux

  • Integrated ARM926EJ-S CPU with 32KB data cache and 16 KB instruction cache
  • Power Management Units with DC-DC switched converter supporting Li-lon batteries
  • 2x 10/100 Ethernet MAC supporting IEEE 1588 protocols and one 3-port L2 switch
  • Two FlexCAN2 interfaces
  • Two instances of Universal Serial Bus (USB) High-Speed integrated PHY
  • 8-Channel ADC configured as12 bits, up to 2 Msps sample rate
  • Thermal protection temperature sensor
  • Multiple connection interfaces(UARTs、SSP、SDIO、SPI、I2C、I2S)
  • Low-cost 54MHz ARM9
  • Industrial temperature range
  • Highly integrated stamp hole pin
  • Size up to 4cmX3.5cm
Contact Us
  MY-IMX28 Core board module  
  • CPU：MX283/7, 454 MHz
  • Memory：128MB DDR2-400 SDRAM
  • Storage：128MB NAND Flash，up to 1GB
  • Power Supply：3V to 5.5V
  • Size：40mmX35mm
  • Temperature：-20°C ---85°C (Expansion industrial) -40°.85°C(Industrial)
-40°C ---85°C (Automotive)

Instruction of mother board icon)

Icon (interface module) (icon)((interface module)  
1 programming key 12 GPIO0
2 reset key 13 GPIO1
3 CAN1 14 ethernet1
4 CAN0 15 ethernet0
5 dial switch 16 SD card
6 debug serial port 17 CODEC interface
7 ADC 18 touch screen interface
8 TTL_COM2 19 two way USB HOST
9 TTL_COM3 20 MINIUSB programming interface
10 TTL_COM0 21 5V power source interface
11 SPI 22 WIFI